top of page
Craft Health Pte Ltd

平台

硬件、软件和材料集成到一个系统中。

三个部分协同工作,使配方从数字配方到打印剂量在一个受控过程中完成。

转变

从手工操作到可控的数字化流程。

人工流程

工艺健康流程

剂量准确性取决于当天负责操作的人员。

手工配制多活性或多层剂量药物较为困难。

每一种新配方都是手动操作,且没有文档记录。

从单次处方扩展到试点批次意味着一切重头再来。

✔ 每次都使用同一份电子处方打印每一剂药物

✔ CraftBlends 可原生处理多活性、多层配方

✔ 每个批次都是一个数字记录,您可以随时调取。

✔ 同一配方可从单剂量扩展到试生产批次。

CraftMake 生产型打印机

硬件

CraftMake

无需加热和紫外线固化,即可根据数字配方直接构建多层、多活性剂型的自动化系统。

软件

CraftControl

无代码 3D 打印:将配方数字化为精确、可重复的构建文件。
还允许单个操作员控制多台打印机。

单一操作员,多台打印机控制

3D打印预混料

CraftBlends

使用 FDA GRAS 辅料,便于与活性成分进行不同控释曲线的制备。
可根据要求提供定制配方。

三层片剂,溶解速度各不相同

两层片剂以不同的速率溶解

工作原理

01

混合

将活性成分和预混料混合,制成糊状物。

02

填写和打印

然后将糊状物装入我们的 3D 打印机 CraftMake™ 中,即可 3D 打印出所需的形状或几何形状。

03

干燥

3D打印完成后,药片会在干燥柜中干燥,以去除多余的水分。

查看平台实际运行。

WhatsApp Craft Health

Craft Health

面向调配和个性化剂型的药品级3D打印。

  • LinkedIn

联系我们

67 Ayer Rajah Crescent
#07-03
Singapore 139950

info@crafthealth.me

Important information. For healthcare and industry professionals; general information only, not medical, regulatory or legal advice. Performance figures come from internal testing and customer deployments, and results vary. CraftMake™, CraftControl™ and CraftBlends™ are preparation equipment, software and excipient premixes, not medicinal products, and are not intended to diagnose, treat, cure or prevent any disease. These statements have not been evaluated by the HSA (Singapore), FDA, Health Canada or any European authority. References to peptides, probiotics and biologics describe process compatibility only. Compounded medications are not FDA-approved. Each pharmacy is responsible for complying with its applicable laws and standards (e.g. USP, 503A/503B, provincial rules, national law, Ph. Eur.); references to these standards do not imply endorsement. In North America, CraftMake™ is sold by PharmaTher Holdings Ltd., an independent distributor. Nothing on this site is an offer of securities. © 2026 Craft Health Pte Ltd. M3DICINES™ is a trademark of PharmaTher Holdings Ltd.

bottom of page